The scrap iron crusher produced by Luyou is a highly efficient equipment recognized by the metal recycling and processing industry, and is imitated by various peer enterprises. Recently, Lu you found that some customers installed the crusher at the site has a huge safety hazard at work, which is surprising: there is no proper safety protection on the equipment site, how to do if there is a problem?

As a responsible and honest enterprise, Luyou explains here that the safety protection of scrap iron crusher is mainly to prevent the metal fragments flying out of the crushing, which is not possible by the baffle. First of all, the crusher must be placed away from the crowd, the construction site must be surrounded around, the height of the circumference can be based on the actual situation. And where flying debris is easily touched, it needs to be thickened. The second is to set up a special shelter for the operators in the construction environment and install protective iron sheets. An iron plate wall with a thickness of 10-12 cm is set opposite the hole of the conveying material, and its height should be able to prevent fragments from flying over.

When using scrap iron crusher, we must take these protective measures well and fully take into account various conditions. As a crushing manufacturer, we should not only make the equipment safe and trouble-free, but also give safety guidance on the site installation, only in this way can we solve the problem of safety protection.