The correct use of machinery and equipment, careful implementation of maintenance systems and strict compliance with safety procedures are necessary conditions to extend the service life of the machine, improve production efficiency and ensure safe production. To this end, it is recommended that users establish maintenance and safe operation procedures, operators should be familiar with the machine structure and order, but also must pay attention to the following points:

1. The oil added to the box must be strictly filtered through a copper mesh of more than 100 mesh, and often maintain sufficient oil. If insufficient, oil should be added immediately.

2. The tank should be cleaned once every six months, but the first cleaning of the filter oil should not exceed 40 hours to remove one-time pollution. The new oil that has been used once is only allowed to be used again after being strictly filtered. The oil tank should be scrubbed with new cloth, strictly using scrap, yarn and rags.

3. Check the oil filter in the oil tank once a year, and remove the foreign matter in time, and clean it with gasoline.

4. Each lubrication place of the machine should be filled with lubricating oil at least once per shift according to the requirements.

5. Those who do not understand the structure, performance and operation procedures of the machine shall not start the machine without authorization.

6. When there is oil leakage or abnormal phenomenon in the work, it should be stopped immediately, analyze the cause and eliminate the fault, and shall not be forced to run with illness.

7. When the pump and valve pressure gauge are adjusted, experienced technical workers must be carried out. If the pressure gauge is found to be faulty, it should be checked and repaired immediately or replaced with a new table.

8. The user shall formulate detailed maintenance and safety operation procedures according to the specific situation.

9. If the user can not be removed in the event of a fault, please contact the company immediately, the company will send personnel to repair.